ROBOCAT a test bed and work in progress

Robocat frame.

2300kv motors
20Amp Esc's
1500mah 14.8v Lipo
5x4 Dal Bullnose props
Flycat PDB
Leds n stuff.







Comments

Post a Comment

Popular posts from this blog

Image
Diatone Crusader GT2 200 FPV Racer Description: Brand: Diatone  Item name: Crusader GT2 175 Width: 200mm Material: carbon fiber Thinkness: 5mm Height: 37mm Motor mount boit holes: 16/19mm   Features: D-Link F3 flight controller 302X 30A BLHeli_S ESC (input voltage: 3-4S Lipo) D-Silver 2205 2480KV competitive motor HS1177 700TVL SONY camera SP3 48CH video transmitter (input voltage: 3-4S Lipo) 5 inch propeller 0.32KG (0.7 pound)   Note: this is the PNP (Plug and Play) version that comes without battery, charger, receiver or remote control.   Package included: 1 x Diatone Crusader GT2 200 FPV Racing Drone
Read more
Image
ImmersionRC Vortex 150 F3 OSD 600mW 40CH FPV Racer PNP Specification: Brand name: ImmersionRC Item name: Vortex 150 FPV Racer Wheelbase: 155mm Arms: 2mm Flat CF/Plastic Hybrid Frame: 2mm CF, with Aluminium Standoffs Motors: Custom 1306-3100kV, 2mm Shaft ESC: 16/20A EzESC Gen3 ESCs: Full Custom, 16A cont. 20A peak, rotorSENSE, OneShot125, OneShot42, Multishot Flight Controller: STM32F303 based ('F3') Gyro: SPI Gyro, for 8kHz loop speeds OSD: Full Graphic Video Tx Power: 600mw 40CH Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!) FPV Camera: FatShark 600TVL CCD (HS1177 sensor + chipset) Flight Time: Highly dependent upon battery, and flying style, 3-4 mins typical Power Requirements: 3s-4s LiPo, 4s 750mAh >45C recommended Weight: <249.99g w/500mAh pack Note: Compatible receiver and display device required for initial setup and use, not included. Feature: Twin ‘F3’ Processors (Flight Con...
Read more